Are the brake pads fine? How to extend the brake pad life?

Introduction

Maintaining a car is one of the most technical job one could ask for. Mostly people don’t even bat an eye after purchasing the car. They continue using it till it is functioning which is ideally not the way to go. There are a number of different things that everyone should constantly look after when taking care of their vehicles. Whether it is their engine oil or the tires, each and everything needs to be checked constantly to ensure that everything is up to date.

look after when taking care of their vehicles. Whether it is their engine oil or the tires, each and everything needs to be checked constantly to ensure that everything is up to date.

Importance of brake pads
One of the most difficult things to keep track of is the brake maintenance. Brake pads are very important to look after. Normally people don’t pay any attention to it and continue using them for long periods. However, what they need to understand is that like all the other components, brake pads too have a specific timeframe. So, without just dragging the brake pads to the point where it starts affecting the other components and has a ripple effect, car owners should get them checked out.

Well, it heavily depends on how you use the car. You might just go to your regular mechanic and he will give you a rough estimate of, say about 10,000 miles. Yes, this is a fair estimation, but one should not completely rely on this, hands down. Rather people should consider their car usage and check if the brakes are working accordingly or not. The cost to repair the Mercedes ml300 brakes varies from car to car. You just need to keep in mind which part is affected and then handle it accordingly. There are a number of different ways through which one can check the brake pads .

Things to check out for extension in the life of braking pads
Normally people don’t pay much attention, but the brake fluids need to be checked upon after every year or two. The fluids in the braking fluid should contain about 1.5 to 2% moisture ideally to make sure that the braking pads are in order. Talking about braking pads, once the frictional capability of the pads worn out, they should be replaced. Now the question is how would you know when the frictional capability is worn out. Well, there are a number of ways to check this thing out. Let’s have a look at some of them;

  1. Grinding noises which braking: If your car tends to make annoying noises at every brake, then it probably has some kind problem. There should ideally be no noises while you apply the brakes.

  2. Brakes feeling hard or soft: If you feel that it is slightly difficult to apply the brakes (i.e. brakes go hard), then there is probably an issue with the brake pad. In contrast, if you feel that you need to push the brake pad deep to apply the brakes (i.e. brakes are soft), then that is a matter of concern too.

  3. Braking car moves in one direction: IF your cars tends to move in a specific direction after the application of brakes, then this is also an indication of some problem.